New Parts from E-Flite - Blade CP & CX

[axis]

Link to listing at Horizon (http://www.horizonhobby.com/Shop/ByCategory/Product/Default.aspx?ProdID=EFLH1240)
Inner Shaft w/Aluminum Head/Hub: BCX
Product Number: EFLH1240
Due Mid February
$16.99

Link to listing at Horizon (http://www.horizonhobby.com/Shop/ByCategory/Product/Default.aspx?ProdID=EFLH1170)
Bell Mixer Upgrade Kit: BCP
Product Number: EFLH1170
Due Early February
$24.99
Adds Bell-Hiller mixing to deliver lightning-fast cyclic response for aggressive aerobatics
New three ball bearing equipped blade grips with mixing arm mounts
Kit includes complete hardware with all required components, six ball bearings and spindle
Pre-assembled for quick and easy installation

[rchelirookie]

I have been waiting for the aluminum head for the cx. Thats the only part I break. I could probably stop breaking it if i would stop flying it outside in the wind, just too little to take the big winds.

[axis]

Diid Horizon complain about my linking the pictures? I noticed you edited my post and the pics are gone.

[Motions]

If you want a really nice CNC head for the CX, check this one out.

http://www.microheli.com/mhshop/product_info.php?cPath=97&products_id=304

[axis]

WOW!! Very nice.. Once we finish the upgrade to a 3 cell LiPo that will be a much needed piece. :D

[axis]

Apparently the Bell/Hiller upgrade is available now too.. woo hoo

[Gage]

I got my new inner shaft in today. I have broke it like 4 times. I just get tired of flying it around my house, and try to go outside. It does not even get off the ground :mad:

[axis]

You got a stock inner shaft right?

[Gage]

Yes i got a stock one anyway, i forgot how to install it does anyone have the link?

[HeliGuy]

Yes i got a stock one anyway, i forgot how to install it does anyone have the link?

I installed mine last night. I removed the body completely, then removed the bearing on the botton of the Heli. The shaft then slipped out and I replaced it with the new one. Reattached the bearing and then put the body back on. The only part I found hard was reattaching the swaybar ontop. that was hard for me!

HeliGuy

[axis]

I finally had a chance last night to get and install my Bell-Hiller mixer upgrade on my CP. WOW what a difference. The heli is very responsive now. Not touchy, it just goes when you tell it. I like it.. :D
I had to fly it in a warehouse last night and the heli needs a little trimming. I'll get it trimmed out and fly it outside this weekend and see what she can do.

[Dirtbrakes]

Do you have any trouble with the gyro with the 4in1? I can't get the tail of my CP to calm down.

[axis]

You mean with the new head vs the old head? No I had no issues with it. The gyro worked fine until I overheated it.
Is the tail wagging?