HeliRaptor
05-18-2009, 01:07 AM
I have 1 brand new G-Force T-Rex 700N Tuner Arms (Mixing and Washout) up for grabs (free), they go as a pair.
Conditions :
- You need to have a T-Rex 700N.
- You need to be registered on rcheliforum.com AND www.rchelimag.com/forum/
- You need to be willing to do a review of each item on rcheliforum.com and on www.rchelimag.com/forum/
- First person to PM me (HeliRaptor) on www.rcheliforum.com gets to do the review and keep the item.
- You must mention you received the part"Courtesy of G-Force Heli and RCHeliForum"
Shipping is free in the Conus.
Here is the description from the GForce site:
G-Force 700N Tuner Arms (Mixing & Washout) part# GFT7126
The new G-Force Tuner mixing and washout arms (part# GFT7126) have been designed to enable the T-Rex 700N rotor head to be programmable for extra stable to extra responsive performance. Pilots that use their 700N for AP or F3C can now set the head to be extra stable, while 3D pilots can go aggressive with the programming.
To handle the extra cyclic that the new Tuner arms will provide to the 700N, G-Force has also made available a new hi-tilt flybar cage conversion (part# GFT7128), that has been beefed up to utilize the full potential of the new arms; as well as handling the hardest 3D flying conditions.
Installation instructions included.
(requires original M3X7x3mm bearings and alum collars from the stock arms)
Conditions :
- You need to have a T-Rex 700N.
- You need to be registered on rcheliforum.com AND www.rchelimag.com/forum/
- You need to be willing to do a review of each item on rcheliforum.com and on www.rchelimag.com/forum/
- First person to PM me (HeliRaptor) on www.rcheliforum.com gets to do the review and keep the item.
- You must mention you received the part"Courtesy of G-Force Heli and RCHeliForum"
Shipping is free in the Conus.
Here is the description from the GForce site:
G-Force 700N Tuner Arms (Mixing & Washout) part# GFT7126
The new G-Force Tuner mixing and washout arms (part# GFT7126) have been designed to enable the T-Rex 700N rotor head to be programmable for extra stable to extra responsive performance. Pilots that use their 700N for AP or F3C can now set the head to be extra stable, while 3D pilots can go aggressive with the programming.
To handle the extra cyclic that the new Tuner arms will provide to the 700N, G-Force has also made available a new hi-tilt flybar cage conversion (part# GFT7128), that has been beefed up to utilize the full potential of the new arms; as well as handling the hardest 3D flying conditions.
Installation instructions included.
(requires original M3X7x3mm bearings and alum collars from the stock arms)