View Full Version : My MSH Protos has arrived
HeliRaptor
12-27-2008, 01:19 PM
I thought I would share the newest Heli in my Fleet. Actually my fleet has dwindled down quite a bit as I am likely to give only electrics a try this year.
Anyhow I have fully built the kit (no electronics yet) and completed a build thread here (http://rcheliforum.com/viewtopic.php?t=1430) for those who are interested. I would post the thread here but it is easier just to link to it.
Here are a couple pics.
http://rcheliforum.com/images/protos_build/39.jpg
http://rcheliforum.com/images/protos_build/40.jpg
One is of the Protos Kit Built and the other is my T-Rex 450 and the Protos together.
heli-cuzz
12-27-2008, 02:53 PM
Looks like a nice pair together. :)
HeliRaptor
02-08-2009, 01:32 PM
Thanks.
I finally purchased and installed the electronics.
Here's what I got:
1 x JR G770 3D Gyro (JRPG7703D)
1 x JR DSM Double Aluminum Transmitter Case (JRPA700)
1 x JR X9303 2.4Ghz DSM2 9Ch Helicopter Radio System, No Servos, R921 DSM2 Receiver (JRP2925)
5 x Deans Ultra Plug (1 pair) (WSD1300)
1 x Thunder Power TP1010C 1-10 Cell Li-Poly DC Charger (THP1010)
3 x FlightPower EVO25 6S1P Lithium Polymer Battery (22.2V/2500mAh) (FPWEVO25-25006S)
1 x JR DS3500G Ultra Speed Mini Gyro Servo (JRPS3500G)
3 x JR DS3517MG High Speed Mini Metal Gear Servo (JRPS3517MG)
1 x Scorpion 60A 6-Cell Brushless ESC with Switching BEC (SCP-SW60AESC)
Unfortunately the Speed controller is bad. When I plugged it into the battery it let off a large puff of Red Smoke. All connections are soldered and tight. They are proper as well. I verified the input voltage as well as the output voltage. Power goes to the servos but not the motor leads. Somethings up. Waiting on a replacement under warranty.
HeliRaptor
02-08-2009, 01:33 PM
I updated the build thread here (http://rcheliforum.com/viewtopic.php?t=1430) for those who are interested.
I would post the thread here but it is easier just to link to it. Maybe if I when I have more time on my hands I will also post it here for everyone.
HeliRaptor
02-20-2009, 02:06 AM
I would post the thread here but it is easier just to link to it. Maybe if I when I have more time on my hands I will also post it here for everyone.
I decided to post the thread here as well:
http://rchelimag.com/forum/showthread.php?t=7209
:D Enjoy!!! :D
vBulletin v3.0.7, Copyright ©2000-2010, Jelsoft Enterprises Ltd.