WiscHeli
10-21-2007, 02:03 PM
For Sale ; JR 652 Radio System CH 57
JR 652 Radio CH 57
2 x R600 6 Ch FM RX CH 57
Jr 4.8V 4 cell 700mah battery
Jr NES-221 Charger
Tx 11.6v 50ma Rx 5.8v 50ma
Manual
Overview
JR's 6-channel system is loaded with features and surprisingly affordable. Like the XP652 can be used with either sport-level airplanes or helicopters. This ability alone continues to set the JR 6-series of systems apart from other 6-channel sport systems in its class. Other functions DSC (Direct Servo Control), dual rates, exponential, programmable mixes, and 3-character model naming. super simple programming logic that divides software functions into two basic modes: System Setup and Function.
System Setup Mode allows the modeler to:
• Select model type (air or heli)
• Reset default values
• Make switch assignments
• Select wing mixing (normal, delta, flapperon or V-tail)
• Select one of five stored models for that model type (air or heli)
• Change model names
• Select modulation (PPM [ which is FM], Z-PCM, or S-PCM)
Function Mode allows the modeler to adjust programming functions for a specific model, such as:
• Servo reversing
• Dual rates
• Exponential
• Sub-trims
• Travel adjust
• Aileron, rudder, and elevator mixing (air)
• CCPM mixing (heli)
• 3-point throttle and pitch curves (heli)
• 2-throttle curves 3 pitch curves w/ throttle hold activated
$125 plus shipping............ $165 plus shipping
1 R600 RX....................... 2 R600 RXs
JR 652 Radio CH 57
2 x R600 6 Ch FM RX CH 57
Jr 4.8V 4 cell 700mah battery
Jr NES-221 Charger
Tx 11.6v 50ma Rx 5.8v 50ma
Manual
Overview
JR's 6-channel system is loaded with features and surprisingly affordable. Like the XP652 can be used with either sport-level airplanes or helicopters. This ability alone continues to set the JR 6-series of systems apart from other 6-channel sport systems in its class. Other functions DSC (Direct Servo Control), dual rates, exponential, programmable mixes, and 3-character model naming. super simple programming logic that divides software functions into two basic modes: System Setup and Function.
System Setup Mode allows the modeler to:
• Select model type (air or heli)
• Reset default values
• Make switch assignments
• Select wing mixing (normal, delta, flapperon or V-tail)
• Select one of five stored models for that model type (air or heli)
• Change model names
• Select modulation (PPM [ which is FM], Z-PCM, or S-PCM)
Function Mode allows the modeler to adjust programming functions for a specific model, such as:
• Servo reversing
• Dual rates
• Exponential
• Sub-trims
• Travel adjust
• Aileron, rudder, and elevator mixing (air)
• CCPM mixing (heli)
• 3-point throttle and pitch curves (heli)
• 2-throttle curves 3 pitch curves w/ throttle hold activated
$125 plus shipping............ $165 plus shipping
1 R600 RX....................... 2 R600 RXs