Phoenix RC update

[bboy]

Any one with Phoenix RC the 1.04a update is out any sim with free update is good for me they changed there site around its done well have fun flying;)
1.04 Update available for download

The 1.04 public beta update is now available for download from our downloads (http://www.phoenix-sim.com/downloads.htm) section. This update contains a large number of changes, new features and bug fixes:

[b]New Features

-fully destructible aircraft: wings, control surfaces, landing gear and rotor-blades can break off with realistic sound-effects. Breakages are fully physically modelled and effect flight characteristics.
-Failures panel:
___-setup preset or random failures of engine(s) and control surfaces.
-all-new window system:
___-resize simulator window with your mouse to any size
___-set a fullscreen mode and swap between windowed and fullscreen
___-minimised/maximised/normal modes all saved and independant
___-select different refresh rates in fullscreen
-all-new configurable streamer system:
___-set different streamers for wing-tips and tail-plane
___-choose from a selection of patterns and colours, or make your own streamers
___-fully physics-driven streamers fall when not under power, and lie along the ground
___-streamer combat now allows you to cut your opponent's streamers realistically
-copy and paste support between Phoenix and Microsoft Windows
-new semi-automatic CCPM demixing system
-add models to your favourite aircraft list for quick swapping
-control profile system expanded to allow different controls for helicopters and fixed-wing aircraft.
-improved phoenixUpdate system makes updating easier and faster.
-wind-sock with realistic flag effect
-software idle-up, gyro-gain and model-reset
-HDR lighting effects for extra realism
-competitions and training-modes in online multiplayer
-ability to edit aircraft online
-sky-compass helps show your position against clear skies more easily

Improvements

-physics changes:
aaa-helicopter:
aaaaaa-autorotation dynamics reworked
aaaaaa-tail mechanics fixed
aaaaaa-gyro behaviour enhanced
aaaaaa-torque effects enhanced
aaaaaa-translational lift improved
aaaaaa-hover stability and drifting more realistic
aaaaaa-gusts and turbulence more greatly affect orientation
aaaaaa-more editable parameters for tail and gyro setup
aaa-fixed-wing:
aaaaaa-even more accurate tip-stall behaviour
aaaaaa-enhanced engine sounds
aaaaaa-more editable parameters for fine-tuning stalling behaviour
-change how Phoenix reacts when you crash your model
-brand new User Interface system - clearer, more precise useability
-expanded and combined simulation and system settings menus
-enhanced transmitter calibration menus make setting your transmitter up easier than ever before.
-more information and descriptions on all aircraft
-enhanced controller display
-onscreen controller now support modes 1,2,3 and 4 setups.
-easier, faster control mapping profile setup
-more preset control profiles, including preset 25% expo variations
-automatic split-screen mode detection and setup
-zoom in and out during flight with your mouse and/or keyboard
-more training options for current modes
-more expert demonstrations with tips and hints
-more realistic grass effects
-enhanced wind compass
-night-flying glow effects enhanced and optimised
-flight information bar shows collective pitch
-maximum wind-speed increased
-ability to set random wind direction
-smoke system improved and optimised for extra realism
-aircraft and sceneries relit and retouched
-more first-start help screens and tips

Bugs fixed

-slider precision
-heading-hold gyro switching
-collision errors fixed
-variants and control profile naming issues

[bboy]

There are more new update for Phoenix on the site there up to 1.04f check it out http://www.phoenix-sim.com/downloads.htm

[DJB2.0]

bboy
It looks like you and me are the only 2 Phoenix users on here.
These guys don't know what they are missing!

but don't worry, man. They will catch on eventually.

[bboy]

Yah DJB its good to know Im not alone it is an excelent sim one of the better ones out there and it seems this company is working harder and harder to make it better for there customers you cant beat that! Oh and by the way happy birthday LOL! ":D"

[milly]

ive just orderd mine, hope it works on my laptop. is there and why it can be used wirelessly with the dx7??

[bboy]

1.05.a (beta) Update

We are pleased to announce that the beta version of the 1.05.a update is now available from the downloads section. This update includes some new features, and fixes some issues reported with the previous update:

- New water system, featuring:





- 3D, Realtime-rendered realistic moving water




- Realtime reflections of models
- Realtime ripples from water interaction
- Improved water interaction physics and floatplane steering





- Streamlined multiplayer code for faster, more stable connections and less lag




- Camera panning improved when simulation is paused
- Favourites issue fixed
- Several sceneries retouched and sharpened http://www.phoenix-sim.com/welcome.htm a couple more heli's added with floats
http://www.phoenix-sim.com/images/aircraft/seaRanger_preview.jpgSea Ranger
Scale IC amphibious helicopterhttp://www.phoenix-sim.com/images/aircraft/knight3D_float_preview.jpgKnight 3D (float)
Performance IC amphibious helicopterhttp://www.phoenix-sim.com/images/aircraft/trex450_float_preview.jpgTRex 450 (float)
Performance electric amphibious helicopter

[DJB2.0]

cool bboy!

This post is the first I've heard of the update.
But geez, what am I gonna do with a Knight 3D with floats? :rolleyes:

I can have fun now.

Do you ever get online with Phoenix? Im online with Phoenix about once a week.
I hope I see you one there some time.

[DJB2.0]

You see there are 2 new flying sites available, too.
Boat Club and Sand Flats :)

[bboy]

Do you ever get online with Phoenix? Im online with Phoenix about once a week.
I hope I see you one there some time. I really havent tried online but it sounds like fun I will deffenetly check it out :)

[mrthomasfritz@yahoo.com]

Any one with Phoenix RC the 1.04a update is out any sim with free update is good for me they changed there site around its done well have fun flying;)
1.04 [beta] Update available for download


I really would love to see a Linux version!

Nobody has one available for that OS yet, and it sure would be sweet if someone would do it.

Yes, Linux is something like 7% of the market for the OS, but it is a growing market.

[bboy]

New Sceneries and a new model :cool:

Two new sceneries are now available


http://www.phoenix-sim.com/images/sceneries/stonehenge.jpgStonehenge

http://www.phoenix-sim.com/images/sceneries/stonehengeNear.jpgStonehenge (Near)




New Model: TRex 600 Nitro (red canopy)








http://www.phoenix-sim.com/images/aircraft/trex600nitro_red_preview.jpgTrex 600 Nitro (red canopy)

Performance/3D IC helicopter

[DJB2.0]

hey BBoy

1.05b!

It isnt much of an update, but its an update.

[bboy]

Thanks Dan its nice to see though this company will fix any problem they find even if its minor gotta love this sim ":D"

[bboy]

New Model: JR Vibe 90 3D

This model is now available The model includes both standard and brushless motor variants.

http://www.phoenix-sim.com/images/aircraft/vibe90_3D_preview.jpgJR Vibe 90 3D
Performance/3D IC helicopter
Physics by: Matt Lodge & Rob Turnbull

[WiscHeli]

other then $50 what is the Difference :confused:

Reflex XTR SIM Simulator 5.03 - JR Plug #129

Reflex XTR SIM Simulator 5.04 iVol & JR/Spektrum Compatabile Plug $179

[DJB2.0]

I see that BBoy.

You know what the best part is?
It didnt cost us $40 for an expansion pack!

[bboy]

I see that BBoy.

You know what the best part is?
It didnt cost us $40 for an expansion pack!ROFLMAO ":D"

[DJB2.0]

Italian and Portuguese User Documentation just realeased!!!!!

How you like THAT for a totally free update???

:D :D

[Dood]

1.05C available now!

1.05.c (beta) Update Readme

New Features

- New water system, featuring:

- 3D, Realtime-rendered realistic moving water
- Realtime reflections of models
- Realtime ripples from water interaction
- Improved water interaction physics and floatplane steering

- Streamlined multiplayer code for faster, more stable connections and less lag
- Several sceneries retouched and sharpened
- Shadow intensity accuracy improved
- Portuguese and Italian languages added
- Select alternate sound library from Audio Options
- Show Frame per second from View menu
- Zoom in on transmitter display under View menu
- Hitec Optic 6 profile added
- Hotkeys view added to View menu

Improvements

- Camera panning improved when simulation is paused
- Tail rotor/gyro interaction improved for smoother, more precise tail reaction on helicopters

Bugs fixed

- Favourites issue fixed
- Knight 3D issue with over 100% simulation speed fixed

[bboy]

New Model: Esky Honeybee King 2

This model is now available from the downloads (http://www.phoenix-sim.com/downloads.htm) section.

The model includes both yellow and white canopy designs, as well as a training version with full training undercarriage. I found this on heli freak its the variant files for phoenix so I was able to put my heli in the sim :cool: http://www.helifreak.com/showthread.php?t=53814

[devindh]

Hi all. New to this forum. That link above for the variant posted. There are colorscheme and sound mod too.

For other usable post here (not meant to advert here),.......

Phoenix variant, http://www.helifreak.com/showthread.php?t=54043
Phoenix sound mod works in 1.05c, http://www.helifreak.com/showthread.php?t=55520
Phoenix colorscheme, http://www.helifreak.com/showthread.php?t=54043
Phoenix heli blade repaint, http://www.helifreak.com/showthread.php?t=55262

Regards.

[devindh]

Some of mine,..

http://i154.photobucket.com/albums/s269/devindefriza/trex600n.jpg

http://i154.photobucket.com/albums/s269/devindefriza/trex600e.jpg

http://i154.photobucket.com/albums/s269/devindefriza/trex450se.jpg

Cheers.

[devindh]

Others,..

http://i154.photobucket.com/albums/s269/devindefriza/minititan325.jpg

http://i154.photobucket.com/albums/s269/devindefriza/f3c-sapphire-gracy.jpg

Cheers.

[scaleheliboy]

http://i154.photobucket.com/albums/s269/devindefriza/trex600e.jpg
.

Thats similar to my Raptor - nice artwork !!

[blax1]

Hi devindh, Welcome to the forum :)
Those heli-s all look great--- Love the Scott Gray look-a-like :cool:

[devindh]

Thanks all,... but i still wait some response if whole this are wrong from other side. I keep all this thing post to all community in this hobby.

Happy cyber flying.

[Shawn K]

Hi devindh, Welcome to the forum :)
Those heli-s all look great--- Love the Scott Gray look-a-like :cool:

Actually, it's closer to Wayne Mann's heli and color scheme than it is Scott Gray's. Wayne flies a Caliber 90 in a Staysee fuselage (and the picture above is clearly a Staysee), and Scott flies a Sylphide in a Super Gracy fuse with a white base color. (A Super Gracey has more of a Hughes 500 look to it than a Staysee.)

[Shawn K]

Just a couple comparison pics... the Orangeish one is Wayne Mann's Caliber/Staysee, the white one is Scott Gray's Sylphide/Super Gracey.

[DVS]

Phoenix now has the T-Rex 500 on their download page.
http://www.phoenix-sim.com/downloads.htm

[blade]

T-Rex 500
Performance/3D electric helicopter

Physics
Bob Johnson (Align UK distributor)
Trevor Burley (Align UK test pilot + 3D Masters competitor)
Ashley Davis (TRexTuning.com)

Please note that this model requires version 1.05.c or later to function. This is available from downloads section.http://www.phoenix-sim.com/downloads.htm#models
http://i220.photobucket.com/albums/dd216/Titanmad/1-2-2008_142242.jpg

[WiscHeli]

D@@@ I have to Get a Phoenix Sim ... Soon :cool:

[WiscHeli]

I found a Phoenix RC Simulator - JR Adapter - phx-sim $135 us .. w/Shipping $154.64

http://www.themodelhelistore.com/flight-simulators/phoenix-rc-flight-simulator.html

[Rappy1]

Get it so also us users of phoenix have people to fly with, I see you can have 8 models flying at any one time. I not yet tried multiplayer i look forward to trying at some point

[Dood]

Get it so also us users of phoenix have people to fly with, I see you can have 8 models flying at any one time. I not yet tried multiplayer i look forward to trying at some point

This is not true.

You can have up to 8 guys in a single session, but only 4 guys can be in the air at the same time.

Im on Phoeix online about once a week or so, you'll see me flying as "Dood".

[Rappy1]

Oh right, i still trying to work it out. everytime i try join a multiplay session it comes up with a red message at bottom of screen saying "unable to connect to session at the moment please try later" Yeah i try later no difference. i tried removing the firewall from the internet and it made no difference, i will have to try plugging computer into the modem rather than doing it over wireless and see if it makes a difference.
Anybody else have this problem?

[DVS]

I found a Phoenix RC Simulator - JR Adapter - phx-sim $135 us .. w/Shipping $154.64


That's not a bad price.
So does this mean that you'll finally get a Phoenix sim. :p

[bboy]

1.05.d (beta) Update

The 1.05.d (beta) update is now available from the downloads (http://www.phoenix-sim.com/downloads.htm) section. Also
New Model: Blade 400

This model is now available from the downloads (http://www.phoenix-sim.com/downloads.htm) section. The model includes both 3D and Sports variants.

http://www.phoenix-sim.com/images/aircraft/blade400_preview.jpgBlade 400
Performance/Sports electric helicopter

Physics
Ade Law

We have also re-released the Honeybee King 2 model with improved tail servo delay attributes.

http://www.phoenix-sim.com/images/aircraft/honeybeeKing2_preview.jpgEsky Honeybee King 2
Light electric sports helicopter

[blade]

http://i220.photobucket.com/albums/dd216/Titanmad/14-2-2008_74928.jpg

[DVS]

Update for the update.

"February 14th 2008

1.05.e (beta) Update

Due to some feedback regarding the "d" update we have located a small issue on a small number of machines.

This has now been resolved, and we would strongly recommend that if you have downloaded 1.05.d that you now download and install 1.05.e from our downloads page.

We thank all of our public beta participants for your continued and valued feedback during the beta process."





http://www.phoenix-sim.com/news.htm

[DVS]

Phoenix re-released 1.05e (beta) February 18. 2008



"1.05.e (beta) Update re-released

The 1.05.e update has been re-released with the Simulation speed upper limit reset to 125%."

[mkoutnik]

Well....I finally did it. I ordered Phoenix today!! Woo hoo! :cool:

Heliguy = $136 + 15 S&H = $151 Sweet!

[bboy]

Congrats! mkoutnik you will love it :)

[vermonster]

Congatulations mkoutnik, best deal around :D

[bboy]

We are pleased to announce that version 1.05.f has now been officially released.

The full list of changes is as follows:

New Features

- New water system, featuring:

- 3D, Realtime-rendered realistic moving water
- Realtime reflections of models
- Realtime ripples from water interaction
- Improved water interaction physics and floatplane steering

- Streamlined multiplayer code for faster, more stable connections and less lag
- Several sceneries retouched and sharpened
- Shadow intensity accuracy improved
- Portuguese and Italian languages added
- Select alternate sound library from Audio Options
- Show Frame per second from View menu
- Zoom in on transmitter display under View menu
- Hitec Optic 6 profile added
- Hotkeys view added to View menu

Improvements

- Camera panning improved when simulation is paused
- Tail rotor/gyro interaction improved for smoother, more precise tail reaction on helicopters
- Added Airtronics RD8000 profile
- Improved profile creation process
- Improved Ttransmitter/Interface connection warnings
- Improved rotor governor response
- Improved tail flick on light electric helicopters
- Added "Servo Delay" editable attribute under Tail section
- Added "Tail wash" editable attribute under Fine Tuning section
- Multiplayer error with incorrect model now shows an icon and does not eject pilot
- Improved spinning effects on rotors
- Improvement on lighting system
- Improved scrolling/lookaround when paused
- Preset CCPM demix for Esky 0406A in Advanced Calibration

Bugs fixed

- Favourites issue fixed
- Knight 3D issue with over 100% simulation speed fixed
- Wind random direction issue fixed
- Beriev flaps + description
- Spitfre wheels no longer penetrate canopy
- Lower blades on Blade CX2 blades no longer faces wrong way
- Various mapping profile creation, copying and deletion issues
- Do not restart handlaunched models when options for no restart is selected
- Reduced tail wash on T-Rex 500
- Fixed error in multiplayer when host changes to scenery not installed
- Fixed high/low wing trainer issue on long-grass flying fields

Please navigate to our downloads (http://www.phoenix-sim.com/downloads.htm) section for more information.

Please note: You must have at least version 1.04.i in order to download this update.

This version is now available on CD-ROM from the accessories section of our online ordering centre (http://www.ekmpowershop4.com/ekmps/shops/phoenixrc/index.asp).

[Dood]

Yep. I downloaded it.
I dont think it's any different from 1.05e (beta), just an official title.

I flew around a bit today, one finger on my right stick, the other on the print screen button.

Looks kinda like one of my helis.
http://i175.photobucket.com/albums/w155/DJB78_bucket/phoenixknight.jpg

[DVS]

1.05g Update released

The latest version of our software is now available for download from our downloads section.

New Features

-Improved switching between heading-hold and rate gyro models
-Added three new control profiles:
__-Spektrum DX6i
__-Futaba 7C 2.4 Ghz
__-Futaba 9Z
-Can now import paint schemes from PhoenixCreator application, and use across internet/LAN

Bugs fixed

-Fixed issue with model size during multiplayer
-Fixed issue with antialiasing and latest NVidia drivers


PhoenixCreator 1.01a (beta) released

We are pleased to be able to offer the first beta release of our brand-new model painting package for free download from our downloads section.

This application allows you to import any model from Phoenix, and create exciting new paint-schemes using an array of powerful tools.

Features

-Import any model installed in your Phoenix simulator
-Use a revolutionary 3D brush system to paint your model in full 3D
-Apply a huge range of decals, or create your own
-Use photographs to copy an existing model colour-scheme
-Export your new scheme to Phoenix, share with your friends and use over internet multiplayer

[bboy]

Awsome DVS thanks that painting thing looks cool I have to go check it out :cool:

[DVS]

I read on HeliFreak that 2 guys are having problems ( Crashes on opening / when starting a new project ). :( :confused:

[bboy]

Every thing worked well for me just have to figure out how it works in between flying :)

[DVS]

1.05.h Update released

"Due to some late reported issues with the previous version, we have updated 1.05.g to 1.05.h, which fixes some minor problems associated with certain graphics cards, as well as an issue with loading custom colour schemes in a recording.

If you have downloaded and installed 1.05.g we strongly recommend that you update to this version as soon as possible.

We apologise for any inconvenience this may have caused."


http://www.phoenix-sim.com/news.htm

[bboy]

Re-released: TRex 450 SE

Due to a large number of requests, this model has been re-released with improved UV mapping so that it is more compatible with our PhoenixCreator software.

If you intend to create a custom colour-scheme for this model, please download the revised version before doing so.

http://www.phoenix-sim.com/images/aircraft/trex450SE_preview.jpgT-Rex 450 SE
Performance/3D electric helicopter



Unfortunately if you have already created a scheme for this model it will not be compatible with the new version.

[bboy]

New Models: Bell 222 and Airwolf

The Bell 222 and Airwolf models are now available from our downloads (http://www.phoenix-sim.com/downloads.htm) section.

Both models feature retractable landing gear, and the Airwolf model features retractable weaponry which appears when the landing gear is retracted.

http://www.phoenix-sim.com/images/aircraft/bell222_preview.jpgBell 222
Scale IC helicopter


http://www.phoenix-sim.com/images/aircraft/airwolf_preview.jpgAirwolf
Scale IC helicopter (with retractable weaponry)

[DVS]

Just downloaded the "Lady" Thanks bboy :)

[ShadowSpawn]

I just reported a bug to Phoenix and was wondering if anyone else has run across it. I'm doing simple tail-in hover (450SE & freedomPark - Winter) and occasioanlly the heli will flip to nose-in by it's self - depending on what I'm doing I can recover by flpping the tail 180 - or crash....

ShadowSpawn

[DVS]

I just tried with T-Rex 450 SE (3D & trainer in Freedom Park - Winter) for 4 to 5 mins. each and no problem.

[DVS]

"April 11th 2008

Two new updates are now available for download from our downloads section:

1.05.i Update

Improvements

-Improved camera panning

Bugs fixed

-Error with models which use another model's colour scheme when using custom schemes
-Improved changing between display modes
-Fixed Sunglow not functioning issue

PhoenixCreator 1.01.b (beta) Update
Changes

-removed UV mapping tool.

Due to an incompatibility with existing file format this tool has been temporarily removed. We hope to reintroduce an improved version of this tool in a future update of PhoenixCreator.

New features

-Added UNDO menu items
-F1 shows help file
-ability to hide and enable objects seperately on Object Bar
-more workspace options under pop-up menu
-ability to show only paintable objects, or all objects
-options menu:
__ -antialiasing option
__ -change background colour
-set brush, shape, text, floodfill alpha transparency
-change brush alpha with mouse wheel
-use ALT key to pick colour whilst using any tool
-use ALT+right-mouse to pan instead of middle-button
-use UP and DOWN arrows to zoom in and out instead of mouse-wheel
-better error messages
-remember export name and show current export name in title-bar
-can delete a project-file during open/import/save menus
-can delete schemes and view currently saved schemes during export
-prompt to save current project when opening, importing or quitting
-option to realistically light model with reflections (requires reimporting model for full effects)
-improve changing display modes
-shape manager lets you load and save shapes
-undo for shapes

Bugs fixed

-exit menu now functions correctly
-restore points now function correctly
-rotorblurs invisible on all models
-open/save/export menus now appear straight away under vista
-hide object bar now functions
-objects which use shared texture importing fixed
-project text onto texture upside down fixed
-exporting to external editor suddenly changes to grid fixed
-improved scaling from centre widget
-main window not focused correctly fixed

For more information please visit our downloads section."

[DVS]

1.05.j Update released

"The latest version of our software is now available for download from our downloads section.

Please download and install this update if you have an older version installed on your computer.

Bugs fixed

- Fixed issue when loading a custom colour scheme with transparency
- Fixed issue with panning camera in freelook mode during a multiplayer session
- Fixed some minor multiplayer stability/framerate issues"

[bboy]

April 22nd 2008

New Model: JR Vibe 50

Special thanks to Stuart Mott (3D Masters champion) and Robert Mott for the physics implementation of this model.

This model is now available from our downloads (http://www.phoenix-sim.com/downloads.htm) section.

http://www.phoenix-sim.com/images/aircraft/vibe50_preview.jpgJR Vibe 50
Performance 3D IC helicopter
Physics: Stuart & Robert Mott

[vermonster]

now why would anybody want to buy a different sim? :)

[DVS]

Phoenix has a new look
http://www.phoenix-sim.com/welcome.htm
and new downloads J3 Piper Cub - Scale IC airplane & J3 Piper Cub floatplane - Scale IC floatplane

[mkoutnik]

The Hirobo Sceadu 50 heli was released for download today...Go get it!