connecting servos to linkage

[Felony44]

When connecting the servos to the linkages do you turn the radio on and let the servos center? is there certain positions the sticks and or switches need to be in when your making your connections. I have a JR 9303 and a raptor 50 with a 401 gyro and 9254 tail servo. I also have a push pull elevator and direct tail connection

[tdswan]

The best way is to hook each servo to a channel like the rudder which centers all the time and then adjust the horns so that they're at a 90 degree angle to the linkage. Once centered, then re-connect them to the proper channel and you're all set! If it's the rudder servo, then eliminate the gyro first by directly connecting the rudder servo to find center.

[Felony44]

Ok i was having a little problem til i figured out my throttle needed to be reversed everything else has worked out im gonna check for 90 on the horns and then program the radio ,heck i may be able to fly this thing this weekend

Thanks again :D

[heli-fan]

Double and triple chech your your throttle servo and carb opening, you don't want a wide open throttle on your first start.

[Felony44]

yea i havent setup the throttle yet but thats one thing i will check before i start it up i dont want to lose body parts