MikeV
04-05-2007, 05:37 PM
Two major announcments from Futaba:
Taking twelve-channel control to a new level!
Futaba’s new 12FG radio combines the unmatched precision of 2048 resolution with the groundbreaking advantages of Futaba’s proven FASST 2.4GHz system. This is the radio for discerning R/C pilots who insist on state-of-the-art features and functions for the most precise control imaginable. And because it’s from Futaba, you can fly it with confidence knowing that the industry’s finest research and development has gone into it!
The advantages of FASSTTM Futaba 2.4GHz systems:
Constant Channel Shifting
Other 2.4GHz systems hold firm to one or two frequencies, increasing the potential for interference. The frequency of Futaba 2.4GHz FASST systems shift every 2 milliseconds, so there are no signal conflicts or interruptions — and no need for a frequency pin!
Pre-VisionTM Packet Screening Technology
2.4GHz FASST scans incoming data and applies sophisticated error correction techniques — resulting in a system that gives you a solid, impenetrable connection with your model.
Dual Antenna Diversity (DAD)
Futaba 2.4GHz FASST systems seamlessly select the best reception between two receiver antennas, so there’s no loss of signal.
100x Faster Antenna Switching
If the receiver notices a problem with the data coming into one antenna, it rapidly switches to the other - looking for the sharpest signal.
*Comparing the R606FS receiver to the AR6000 receiver.
Custom-Developed IC Chips
Futaba uses custom IC chips that have been designed specifically for radio-control — ensuring quality, reliability, and safety. This is why Futaba FASST systems are faster and more reliable than the competition.
14-channel “all-in-one” receiver
With the R6014FS receiver you will be able to take advantage of all twelve channels on their 12FG. The R6014FS receiver, included with the 12FG is the first spread spectrum receiver to offer more than eight channels. Full-range systems from other manufacturers include a bigger, two-piece receiver, and you must purchase a smaller park flyer receiver separately.
Over 2x Less Minimum Latency
Latency is the elapsed time between your movement of the transmitter controls and servo response. In Futaba 2.4GHz FASST systems, that response can happen over twice as fast — so you feel less like you’re “out in front” leading your model, and more like you’re inside driving or flying it.
*When comparing the 6EX FASST system to the DX7.
Easy Link TM
Futaba 2.4GHz FASST systems leave the factory already linked. Once linked the receiver will recognize and respond ONLY to that transmitter. Binding more receivers is not a problem — the linking process is simple...just push a button on the receiver.
Features:
Priced lower than other 12-channel radios!
R6014FS Receiver
Quad-Bearing Gimbals
SD Card Data Storage & Transfer (SD card sold separately)
Pre-Programmed Mixes
Finely Tuned Setting Adjustments
Variable Dual Rates (VDR)
Servo Grouping
255 x 196 LCD Screen with Adjustable Contrast
7.2V 1700mAh NiMH transmitter battery – for longer life
30 model memory
Specs:
2048 G3 resolution for real-time response
Combines airplane and glider functions into one program
Includes helicopter programming
Offers 8 flight conditions
Features digital trims on all 4 main channels
10 programmable mixes
Stock Numbers:
FUTK9275 12FGA FASST R6014FS AIR MD 2 N H
FUTK9276 12FGH FASST R6014FS HELI MD 2 N H
FUTK9277 12FGA FASST R6014FS AIR MD 1 N H
FUTK9278 12FGH FASST R6014FS HELI MD 1 N H
In Stock: Early Summer
For more information visit: www.2.4gigahertz.com
#2:
***Futaba FASST™ Module / Receiver Sets for 2.4GHz***
Photos: Attached.
More 2.4GHz breakthroughs from Futaba!
If it’s from Futaba, you know it’s done right — the first time! 2.4GHz systems are the hottest category in R/C, and Futaba is once again at the forefront with three new module/receiver sets. These modules are designed to work with existing Futaba radios, so you can simply plug them in and start enjoying all of the benefits that spread spectrum technology has to offer, without having to invest in a new transmitter! No other manufacturer understands 2.4GHz as well as Futaba, who has the experience and expertise to develop hobby-specific components that are unmatched in performance and reliability.
The advantages of FASSTTM Futaba 2.4GHz systems:
Constant Channel Shifting
Other 2.4GHz systems hold firm to one or two frequencies, increasing the potential for interference. The frequency of Futaba 2.4GHz FASST systems shift every 2 milliseconds, so there are no signal conflicts or interruptions — and no need for a frequency pin!
Pre-VisionTM Packet Screening Technology
2.4GHz FASST scans incoming data and applies sophisticated error correction techniques — resulting in a system that gives you a solid, impenetrable connection with your model.
Dual Antenna Diversity (DAD)
Futaba 2.4GHz FASST systems seamlessly select the best reception between two receiver antennas, so there’s no loss of signal.
(R603FF receiver included with 3PM 2.4GHz does not offer DAD.)
100x Faster Antenna Switching
If the receiver notices a problem with the data coming into one antenna, it rapidly switches to the other, looking for the sharpest signal.
*Comparing the R606FS receiver to the AR6000 receiver.
Custom-Developed IC Chips
Futaba uses custom IC chips that have been designed specifically for radio-control — ensuring quality, reliability, and safety. This is why Futaba FASST systems are faster and more reliable than the competition.
Compact, “all-in-one” receivers
Futaba’s small, powerful 2.4GHz FASST R606FS and R607FS receivers for flight systems can control giant-scale models as easily as park flyers and weigh a scant 7 grams without case. Full-range systems from other manufacturers include a bigger, two-piece receiver, and you must purchase a smaller park flyer receiver separately.
Over 2x Less Minimum Latency
Latency is the elapsed time between your movement of the transmitter controls and servo response. In Futaba 2.4GHz FASST systems, that response can happen over twice as fast — so you feel less like you’re “out in front” leading your model, and more like you’re inside driving or flying it.
*When comparing the 6EX FASST system to the DX7.
Easy Link TM
Futaba 2.4GHz FASST systems leave the factory already linked to the receiver code. Once linked the receiver will recognize and respond ONLY to that transmitter. Binding more receivers is not a problem — the linking process is simple...just push a button on the receiver.
Features:
New design for cleaner, safer, and secure installation –
Unlike other modules, Futaba’s FASST System modules don’t have external wires that can get in the way of the transmitter, or possibly get pulled out or disconnected.
One-piece receiver – for easier installation –
The R606FS and R607FS are small enough to use with park flyers, but powerful enough to easily control giant-scale planes, Futaba’s line of 2.4GHz receivers is truly state of the art. In addition to not requiring a second receiver for park flyers, Futaba’s receivers boast higher sensitivity for less unwanted interference.
Quick and easy to use -
No need to screw or clamp pieces to the Futaba units. Simply plug them in and fly!
Works with existing Futaba radios –
TM-7: 7-Channel Module and R607FS 7-Channel Receiver
Designed for the Futaba 9C radio, but also works with the 8U, 7U, and 9Z.
TM-8: 8-Channel Module and R608FS 8-Channel Receiver
Works with the 9C and 9Z systems, as well as 8U and 7U.
TM-14: 14-Channel Module and R6014FS 14-Channel Receiver
Fits the 14MZ, 12Z, and the NEW 12FG radio.
*Capable of using all 14 channels with Futaba Module/Receiver set
7-Channel Spread Spectrum In stock: Late Spring
R607FS 7CH Receiver FUTL7637
TM-7 Module FUTL8927
TM-7 w/ R607FS Receiver FUTL8950
8-Channel Spread Spectrum In stock: Early Summer
R608FS 8CH Receiver FUTL7638
TM-8 Module FUTL8928
TM-8 w/ R608FS Receiver FUTL8952
14-Channel Spread Spectrum In stock: Early Summer
R6014FS 14CH Receiver FUTL7644
TM-14 Module FUTL8934
TM-14 w/R6014FS Receiver FUTL8956
For more information visit: www.2.4gigahertz.com
Taking twelve-channel control to a new level!
Futaba’s new 12FG radio combines the unmatched precision of 2048 resolution with the groundbreaking advantages of Futaba’s proven FASST 2.4GHz system. This is the radio for discerning R/C pilots who insist on state-of-the-art features and functions for the most precise control imaginable. And because it’s from Futaba, you can fly it with confidence knowing that the industry’s finest research and development has gone into it!
The advantages of FASSTTM Futaba 2.4GHz systems:
Constant Channel Shifting
Other 2.4GHz systems hold firm to one or two frequencies, increasing the potential for interference. The frequency of Futaba 2.4GHz FASST systems shift every 2 milliseconds, so there are no signal conflicts or interruptions — and no need for a frequency pin!
Pre-VisionTM Packet Screening Technology
2.4GHz FASST scans incoming data and applies sophisticated error correction techniques — resulting in a system that gives you a solid, impenetrable connection with your model.
Dual Antenna Diversity (DAD)
Futaba 2.4GHz FASST systems seamlessly select the best reception between two receiver antennas, so there’s no loss of signal.
100x Faster Antenna Switching
If the receiver notices a problem with the data coming into one antenna, it rapidly switches to the other - looking for the sharpest signal.
*Comparing the R606FS receiver to the AR6000 receiver.
Custom-Developed IC Chips
Futaba uses custom IC chips that have been designed specifically for radio-control — ensuring quality, reliability, and safety. This is why Futaba FASST systems are faster and more reliable than the competition.
14-channel “all-in-one” receiver
With the R6014FS receiver you will be able to take advantage of all twelve channels on their 12FG. The R6014FS receiver, included with the 12FG is the first spread spectrum receiver to offer more than eight channels. Full-range systems from other manufacturers include a bigger, two-piece receiver, and you must purchase a smaller park flyer receiver separately.
Over 2x Less Minimum Latency
Latency is the elapsed time between your movement of the transmitter controls and servo response. In Futaba 2.4GHz FASST systems, that response can happen over twice as fast — so you feel less like you’re “out in front” leading your model, and more like you’re inside driving or flying it.
*When comparing the 6EX FASST system to the DX7.
Easy Link TM
Futaba 2.4GHz FASST systems leave the factory already linked. Once linked the receiver will recognize and respond ONLY to that transmitter. Binding more receivers is not a problem — the linking process is simple...just push a button on the receiver.
Features:
Priced lower than other 12-channel radios!
R6014FS Receiver
Quad-Bearing Gimbals
SD Card Data Storage & Transfer (SD card sold separately)
Pre-Programmed Mixes
Finely Tuned Setting Adjustments
Variable Dual Rates (VDR)
Servo Grouping
255 x 196 LCD Screen with Adjustable Contrast
7.2V 1700mAh NiMH transmitter battery – for longer life
30 model memory
Specs:
2048 G3 resolution for real-time response
Combines airplane and glider functions into one program
Includes helicopter programming
Offers 8 flight conditions
Features digital trims on all 4 main channels
10 programmable mixes
Stock Numbers:
FUTK9275 12FGA FASST R6014FS AIR MD 2 N H
FUTK9276 12FGH FASST R6014FS HELI MD 2 N H
FUTK9277 12FGA FASST R6014FS AIR MD 1 N H
FUTK9278 12FGH FASST R6014FS HELI MD 1 N H
In Stock: Early Summer
For more information visit: www.2.4gigahertz.com
#2:
***Futaba FASST™ Module / Receiver Sets for 2.4GHz***
Photos: Attached.
More 2.4GHz breakthroughs from Futaba!
If it’s from Futaba, you know it’s done right — the first time! 2.4GHz systems are the hottest category in R/C, and Futaba is once again at the forefront with three new module/receiver sets. These modules are designed to work with existing Futaba radios, so you can simply plug them in and start enjoying all of the benefits that spread spectrum technology has to offer, without having to invest in a new transmitter! No other manufacturer understands 2.4GHz as well as Futaba, who has the experience and expertise to develop hobby-specific components that are unmatched in performance and reliability.
The advantages of FASSTTM Futaba 2.4GHz systems:
Constant Channel Shifting
Other 2.4GHz systems hold firm to one or two frequencies, increasing the potential for interference. The frequency of Futaba 2.4GHz FASST systems shift every 2 milliseconds, so there are no signal conflicts or interruptions — and no need for a frequency pin!
Pre-VisionTM Packet Screening Technology
2.4GHz FASST scans incoming data and applies sophisticated error correction techniques — resulting in a system that gives you a solid, impenetrable connection with your model.
Dual Antenna Diversity (DAD)
Futaba 2.4GHz FASST systems seamlessly select the best reception between two receiver antennas, so there’s no loss of signal.
(R603FF receiver included with 3PM 2.4GHz does not offer DAD.)
100x Faster Antenna Switching
If the receiver notices a problem with the data coming into one antenna, it rapidly switches to the other, looking for the sharpest signal.
*Comparing the R606FS receiver to the AR6000 receiver.
Custom-Developed IC Chips
Futaba uses custom IC chips that have been designed specifically for radio-control — ensuring quality, reliability, and safety. This is why Futaba FASST systems are faster and more reliable than the competition.
Compact, “all-in-one” receivers
Futaba’s small, powerful 2.4GHz FASST R606FS and R607FS receivers for flight systems can control giant-scale models as easily as park flyers and weigh a scant 7 grams without case. Full-range systems from other manufacturers include a bigger, two-piece receiver, and you must purchase a smaller park flyer receiver separately.
Over 2x Less Minimum Latency
Latency is the elapsed time between your movement of the transmitter controls and servo response. In Futaba 2.4GHz FASST systems, that response can happen over twice as fast — so you feel less like you’re “out in front” leading your model, and more like you’re inside driving or flying it.
*When comparing the 6EX FASST system to the DX7.
Easy Link TM
Futaba 2.4GHz FASST systems leave the factory already linked to the receiver code. Once linked the receiver will recognize and respond ONLY to that transmitter. Binding more receivers is not a problem — the linking process is simple...just push a button on the receiver.
Features:
New design for cleaner, safer, and secure installation –
Unlike other modules, Futaba’s FASST System modules don’t have external wires that can get in the way of the transmitter, or possibly get pulled out or disconnected.
One-piece receiver – for easier installation –
The R606FS and R607FS are small enough to use with park flyers, but powerful enough to easily control giant-scale planes, Futaba’s line of 2.4GHz receivers is truly state of the art. In addition to not requiring a second receiver for park flyers, Futaba’s receivers boast higher sensitivity for less unwanted interference.
Quick and easy to use -
No need to screw or clamp pieces to the Futaba units. Simply plug them in and fly!
Works with existing Futaba radios –
TM-7: 7-Channel Module and R607FS 7-Channel Receiver
Designed for the Futaba 9C radio, but also works with the 8U, 7U, and 9Z.
TM-8: 8-Channel Module and R608FS 8-Channel Receiver
Works with the 9C and 9Z systems, as well as 8U and 7U.
TM-14: 14-Channel Module and R6014FS 14-Channel Receiver
Fits the 14MZ, 12Z, and the NEW 12FG radio.
*Capable of using all 14 channels with Futaba Module/Receiver set
7-Channel Spread Spectrum In stock: Late Spring
R607FS 7CH Receiver FUTL7637
TM-7 Module FUTL8927
TM-7 w/ R607FS Receiver FUTL8950
8-Channel Spread Spectrum In stock: Early Summer
R608FS 8CH Receiver FUTL7638
TM-8 Module FUTL8928
TM-8 w/ R608FS Receiver FUTL8952
14-Channel Spread Spectrum In stock: Early Summer
R6014FS 14CH Receiver FUTL7644
TM-14 Module FUTL8934
TM-14 w/R6014FS Receiver FUTL8956
For more information visit: www.2.4gigahertz.com