hobbitsaun
03-26-2006, 02:21 PM
Hi heli buffs. My wife bought this heli for me but it is too small for me to fly. I have very poor vision and need something larger and easier to see so my loss can be your gain.
This model is suitable for r/c helicopter intermediate pilot, 3D aerobatic action and inverted flight is possible! Stunt flyer!
This is a Ready To Fly Kit, just charge the battery and fly out of box,only need * AA Batteries for Transmitter
CCPM(cyclic collective pitch mixing) design provide precise movement and lighten the helicopter.
Bell-hiller mixer provide immediate respond to the helicopter. Included as follows:
Honeybee CP2. Extra canopy included.
6 channel E-sky heli radio ET106A w/servos and 4-in-1 control module. (mixer speed gyro control system)
AC charger
1 11.1 V li-po 1100mah batteries
E-sky 3 cell 11.1v li-poly fast charger 12-15 volt input
Box serves as carrying case for heli and radio with carrying handle. I decided to keep the extra battery and Smart Plus charger so this is the RTF heli package only.
HoneyBee CP2 Helicopter
This helicopter is suitable for intermediate pilot or pilot who want to try inverted fly and mild 3D flight.
120 deg CCPM system provides precise movement if comparing with the traditional mechanical mixing since there are less linkage/push-rod in the helicopter,and weight is greatly reduced.
Bell-heller mixing greatly increase the sensitive of the whole helicopter, which provide good aerobatic responds.
O-ring inside the center hub reduce oscillation of main blades
11.1V high capacitance Li-Po battery provide enough power for any aerobatic flight(about 15 min flight time per full charge).
Light and hardened wood blade provide great lift, only weigh 11g.
Metal ball swashplate has improved the stability and sensitive of the whole machine.
Pre position servo mounts have been added in this heli, servos can be mounted solidly by screw and easy to install.
With length-adjustable servo push-rod, precision sub trim can be easily set.
Separate main shaft and main gear reduce repair time and noise.
Extended tail boom, reduced the load of tail motor.
Weight is a key to a EP heli, lightened skid set, main gear, main frame and canopy reduce the load of whole heli.
Provide excellent performance outdoor and indoor.
$160.00 shipped USA. prefer paypal or money order. Any questions email me mdhdhm@yahoo.com. thanks.
This model is suitable for r/c helicopter intermediate pilot, 3D aerobatic action and inverted flight is possible! Stunt flyer!
This is a Ready To Fly Kit, just charge the battery and fly out of box,only need * AA Batteries for Transmitter
CCPM(cyclic collective pitch mixing) design provide precise movement and lighten the helicopter.
Bell-hiller mixer provide immediate respond to the helicopter. Included as follows:
Honeybee CP2. Extra canopy included.
6 channel E-sky heli radio ET106A w/servos and 4-in-1 control module. (mixer speed gyro control system)
AC charger
1 11.1 V li-po 1100mah batteries
E-sky 3 cell 11.1v li-poly fast charger 12-15 volt input
Box serves as carrying case for heli and radio with carrying handle. I decided to keep the extra battery and Smart Plus charger so this is the RTF heli package only.
HoneyBee CP2 Helicopter
This helicopter is suitable for intermediate pilot or pilot who want to try inverted fly and mild 3D flight.
120 deg CCPM system provides precise movement if comparing with the traditional mechanical mixing since there are less linkage/push-rod in the helicopter,and weight is greatly reduced.
Bell-heller mixing greatly increase the sensitive of the whole helicopter, which provide good aerobatic responds.
O-ring inside the center hub reduce oscillation of main blades
11.1V high capacitance Li-Po battery provide enough power for any aerobatic flight(about 15 min flight time per full charge).
Light and hardened wood blade provide great lift, only weigh 11g.
Metal ball swashplate has improved the stability and sensitive of the whole machine.
Pre position servo mounts have been added in this heli, servos can be mounted solidly by screw and easy to install.
With length-adjustable servo push-rod, precision sub trim can be easily set.
Separate main shaft and main gear reduce repair time and noise.
Extended tail boom, reduced the load of tail motor.
Weight is a key to a EP heli, lightened skid set, main gear, main frame and canopy reduce the load of whole heli.
Provide excellent performance outdoor and indoor.
$160.00 shipped USA. prefer paypal or money order. Any questions email me mdhdhm@yahoo.com. thanks.