Jr's 9303 Radio and Simulator Usage

[HeatSeeker{DEN}]

Does anyone have information on how to use a 9303 with a simulator? I currently use ClearView as a sim with my Walkera 4 transmitter, but would like to use my 9303 to become more familiar with it. Is there a cable or module that will make the connection? If so, please post the link. :cool:

[HeatSeeker{DEN}]

Has anyone tackeled this one? :cool:

[kiwipilot]

Most tx's are sim compatible these days and a special lead is required.

I'm not familiar with this sim. Is the connection via parallel port or USB?

[HeatSeeker{DEN}]

:cool: The sim will use either usb or serial, but the rear of the Tx has what looks like a headphone jack in size. The module in this radio comes out as well. I haven't found any mention of a cable or module adapter though in the manual or online. I am hoping that someone here uses the same radio. :cool:

[litespeed]

I use my 9303 with Reflex, it came with the cable needed to operate it, but I have no clue if it will work with yours. I haven't tried the one you refer to but I can say that this Reflex sim is absoulutely incredibly realistic. Not perfect but very realistic. Blows FMS away.

Tom

[HeatSeeker{DEN}]

:cool: Does this plug into the jack in the rear or the module area? :cool:

[tdswan]

The plug should go into your DSC/trainer plug on the TX. You'll need to be running the controller in PPM instead of PCM mode. If you don't have a PCM reciever on your heli, don't worry about that. Not sure where to get a cord to do it. Most simulator sites should have one.

[HeatSeeker{DEN}]

:cool: Has anyone else had to buy a cable for the 9303? If so where? :cool:

[Ed Villar]

Try www.simblaster.com