PDA

View Full Version : BLADE CX help needed!!!

Gage
02-23-2006, 04:24 AM
Does anyone have a link to explain to me how to install the inner shaft? PLEASE HELP!
axis
02-23-2006, 05:13 AM
Here (http://www.deeteeenterprises.com/images/BladeCX-manual.pdf) is a CX manual that has an exploded view on page 35. It is a pdf.
HeliGuy
02-23-2006, 08:09 PM
Got my parts in today and will do this tonight. So do I need to unscrew the two screws at the bottom of the assembly?

HeliGuy
Gage
02-23-2006, 10:11 PM
The break down is pretty good, it's in the back of the white book that came with your CX. All you need to take off is the bottom gear and the entire inner shaft slides out upwards. After you loosen the two collar screws, hold the lower gear firmly with one hand and work the top of the shaft back and forth with your other hand and it will pull straight up and out !
Good Luck,
Gage
Gage
02-24-2006, 12:13 AM
Does anyone have a tip on how to get the stabilizer on? I can only get one of the knobs into place the other one never wants to fit. I would really hate to break it before i fly it.